Charging is active. The vehicle is being charged, but the charging has been limited 6A due to high internal temperature.
BLINKING
BLINKING
BLINKING
Device configuration error
Charging station is not configured correctly. Please contact a qualified electrician to check the device configuration. The circuit breaker must be turned off before reconfiguring the DIP switches.
BLINKING
OFF
BLINKING
Power relay is faulty
Charging station not operational. Turn the circuit breaker off. Wait for 5s and turn it back on. If the same problem persists, please contact to a qualified electrician to check the device configuration.
Cable lock motor malfunction
RS-485 communication error
Internal HW error
No RS-485 connection to host device
ON
OFF
BLINKING
The current value of the cable is invalid
Charging process has failed. Check the cable connector for damages. If the cable connector is broken: Replace the charging cable and try again. If the problem persists, please contact a qualified electrician.
