Daily use
Note:
To avoid nuisance alarms, make sure that the cookware you use covers the entire hotplate.
Warning situation
 |
 |
 |
In warning situations the Sensor Unit will give a short beep and the LED will flash yellow every 5 seconds.
Press the Sensor Unit button to reset the warning.
Other user actions, like putting a lid on, stirring the food, or reducing the power will also reset the warning, but with a slight delay.
Alarm situation
 |
 |
 |
 |
When a hazardous situation occurs, the power to the stove is cut off. The Sensor Unit gives an alarm with a sound and light.
To restore power to the stove, wait for the Sensor Unit to confirm the safe temperature with a green light (it may take a minute or more).
Note:
Power cannot be restored before the Sensor Unit has confirmed the safe temperature with the green light.
Note:
When the Sensor Unit is mounted on the
ceiling, you can restore power to the stove only after the Sensor Unit has flashed
green. You do not need to press the Sensor Unit button. Note that with a
mechanically controlled stove, you must turn the knobs to “0”.